Download brochure
(950kB PDF)

Sun Mill products

Solar pumps use the power in sunshine to pump water by combining solar panels with a reliable submersible or piston electric pump. Perfect for rural locations or areas without access to mains power, solar pumps work reliably, day after day, with minimal maintenance.

This chart provides a comparison between the products in the Sun Mill family, from the low-volume Aqua to the high volume, high head Quicksilver model. Jetstream models are not shown on this chart, as their capability is virtually unlimited. Individual charts for each product provide a more fine-grained view of the capability of each pump.

Flow rates are quoted based on 6 full sun hours per day. Actual output will vary depending on weather conditions, the season and your location.

Sun Mill Models

Aqua

from A$2,607 ex GST

The Aqua is perfect for low volume requirements like home or hobby farm water supplies. The Aqua uses a small panel on a fixed frame and a polymer submersible pump to create a cost-effective pumping system.

HeadFlow
10m2,800L/day
70m1,300L/day

Get a quote

flow chart

Cascade

from A$4,250 ex GST

The Cascade provides a power upgrade over the Aqua, sporting a larger solar panel and a stainless steel pump with higher flow. Like the Aqua, the Cascade is optimised to be cost effective for users with small volume requirements.

HeadFlow
10m5,400L/day
35m3,700L/day

Get a quote

flow chart

Rapid

from A$3,996 ex GST

The Sun Mill Rapid is capable of covering a very broad range of pumping conditions. All Rapid pumps are submersible, although optional float assemblies can be attached for surface water sources. From the low flow, low head '200' to the high flow, high head '1200', a the Rapid is our most customisable pump. It can be configured for both centrifugal (for high flow under low head conditions) or helical rotor (for high head conditions) wet ends, providing excellent optimisation for your particular requirements. Figures and pricing are for the 180W model - see the charts for performance under different power levels.

HeadFlow
10m11,400L/day
50m2,760L/day

Get a quote

flow chart
Rapid 200

flow chart
Rapid 1200

Original

from A$4,772 ex GST

The Sun Mill Original provides both high flow and high head in a system that is field-maintainable. The Original is built around a philosophy that simple machines can be repaired with simple tools without requiring special skills. The Original is highly customisable with power ratings from 125W to 700W. Figures and pricing shown are for the 125W model - see the chart for performance under different power levels.

HeadFlow
10m12,600L/day
50m4,900L/day

Get a quote

flow chart

Quicksilver

from A$8,700 ex GST

The Quicksilver utilises an electronic controller coupled to a DC brushless electric submersible motor that maximises efficiency. The combination draws the maximum power from the solar panels and reduces power losses across the power transfer chain to get the most out of your panels. The Quicksilver is capable of handling up to 1000W of connected solar panels and up to 120m of head with power upgrades. Head, flow rates and pricing are for the 260W model - see the chart for performance under different power levels.

HeadFlow
15m14,000L/day
50m4,700L/day

Get a quote

flow chart

Jetstream

from A$POA

The Jetstream is the product for the most demanding pumping applications. Jetstream systems are custom-designed for specific scenarios. Each TSP6000 controller is capable of drawing up to 6000W of solar power, and systems can be strung together to provide water at any head and at any flow rate. A Jetstream system utilising 3000W of solar power was recently installed by Solco's projects division at Laclo, East Timor and is currently delivering around 45,000 litres per day against a 40m head. See the Solco projects page for more information.

HeadFlow
15m100,000+L/day
50m35,000L/day

Get a quote

© 2012 Solco Ltd. | Disclaimer | Privacy policy | Terms & Conditions | Feedback